
UV-C LEDs for UVGI / Disinfection
In order to support disinfection efforts for COVID 19, and other UVGI requirements we are currently stocking UV LED’s for 275 nm in a variety of packages for design and development as well as one complete light source (UV LED module with heat sink, power supply, cooling fan and power cord).
Our UVC LEDs are rated as 275 nm (270 - 280 nm) wavelength and they are available in few different power levels and styles. Choose from single, chip-on-board, strip, to complete light source module using the specification chart below. Volume pricing is available for all items noted in the chart below. Longer strip lengths with higher outputs are also available. Lead time will vary by product ranging from 1-6 weeks depending on the item selected and volume required.
LED's have been increasingly used in applications where UV lamps (mercury, xenon, amalgam, excimer) have operated for decades. Improvements in UV-LED flux density, stability and life hours have made UV LEDs a viable solution for replacing traditional UV light sources such as mercury arc lamps, arch lamps, hot and cold cathode lamps, and grid lamps. UV LEDs are more environmentally friendly as they do not contain harmful mercury, do not produce ozone, and consume less energy. Use of UV-C LEDs is rapidly growing in applications such as germicidal (UVGI) for air, surface and water purification.

Note: Other wavelength LED’s are also available including 310 nm, 365 nm and 405 nm (UVA and UVB). Minimum buy and lead times will vary, but typically start at 25 pcs and 2-3 weeks. Please contact customer service with your wavelength and quantity to receive pricing and lead times.
Image (click for larger image) |
Part # Click for Specs or to Buy |
Type | Peak Wave- length nm |
Radiant Flux |
Voltage |
Constant |
Dimensions LxWxH |
Min Order |
Price Each |
Data Sheet | Request Volume Price or Additional Information |
---|---|---|---|---|---|---|---|---|---|---|---|
![]() |
E275-3 | Bare chip | 275 | 3 - 6 mW | 5 - 7 V | 40-50 mA |
3.45 x 3.45 x 1.3 (+/- 0.2) |
Pks of 5 |
$13.00 | Contact Us | |
![]() |
E275-3-S | Chip on star board | 275 | 3 - 6 mW | 5 - 7 V | 40-50 mA |
20 x 20 x 3.2 | Pks of 5 |
$14.00 | Data Sheet | Contact Us |
![]() |
ILT-PWRTYLED .3W | LED Driver* | N/A | N/A | N/A | N/A | N/A | 1 | $18.00 | N/A | Contact Us |
![]() |
E275-10 | Bare chip | 275 | 10 - 18 mW | 6 - 7 V | 100-150 mA | 3.45 x 3.45 x 1.3 (+/- 0.2) |
Pks of 5 |
$32.00 | Contact Us | |
![]() |
E275-10-S | Chip on star board | 275 | 10 - 18 mW | 6 - 7 V | 100-150 mA | 20 x 20 x 2.9 | Pks of 5 |
$33.00 | Data Sheet | Contact Us |
![]()
|
E275-60-Strip |
UVC LED Strip 60 x 20 mm |
275 | 20 - 30 mW | 12 V | 200 mA | 60 x 20 x 3.8 | 1 | $65.00 | Contact Us | |
![]()
|
ILT-PWR-12600P5 | LED Driver** | N/A | N/A | N/A | N/A | N/A | 1 | 20.00 | N/A | Contact Us |
![]() ![]() |
E275-80-Module | 20 LED UVC Module | 275 | 80 - 100 mW | 10 - 15 V | 600 mA | 78 x 68 x 68 | 1 | $399.00 | Contact Us |
* The ILT-PWRTYLED.3W driver is compatible with the E-275-3 and E-275-3-S 3-6 mW LEDs only.
** The ILT-PWR-12600 driver is compatible with the E275-60 Strip only. Powers up to 2 strips.
